+86 25 84651656
Service@biytech.com

Desktop-CNC Router

Application

  • Wood, plastic, iron, etc engraving .
  • Advertising sign making
  • High school CNC education.
  • Institute of industry technology education.
  • Garage DIY equipment.

Advantage

  1. Cast iron bed, after annealing treatment, 10 years without deformation.
  2. Servo system, high speed and accuracy.
  3. The force of precision spindle, high power, low noise, low failure rate.
  4. Taiwan PMI wire rod and guide, ensure the fine carving.
  5. Not dislocation, not random pause, do not hit the knife.
  6. Automatic alarm function.
  7. The new system, easy learn and operate
  8. Continuously 6000 hours without stopping.
  9. Short-term investment, long-term benefit.

Desktop-CNC router Machine BIY-R3030M

Technique date

X.Y axis working size 300mm×300mm
Z axis travel 90mm- (110mm if u need Rotary device)
Speed of working 0-4000mm/min
Spindle power 1500W (Water-Cooling Motor)
Taper sleeve 3.175mm(1/8"), 4mm (1/6") and 6mm (1/4")
Operating system Mach3 / DSP Controller / NCSTUDIO
File form It supports G-code, which is compatible with so many CAD/CAM software,
such as Artcam / Cascate / Proe / Artgrave / Type3/Artcut, etc.
Repeat accuracy 0.02mm
Voltage 220V-50HZ, 110V-60HZ

Desktop-CNC router Machine BIY-R3040M

Technique date

X.Y axis working size 300mm×400mm
Z axis travel 90mm- (110mm if u need Rotary device)
Speed of working 0-4000mm/min
Spindle power 1500W (Water-Cooling Motor)
Taper sleeve 3.175mm(1/8"), 4mm (1/6") and 6mm (1/4")
Operating system Mach3 / DSP Controller / NCSTUDIO
File form It supports G-code, which is compatible with so many CAD/CAM software,
such as Artcam / Cascate / Proe / Artgrave / Type3/Artcut, etc.
Repeat accuracy 0.02mm
Voltage 220V-50HZ, 110V-60HZ

Desktop-CNC router Machine BIY-R4060M

Technique date

X.Y axis working size 400mm×600mm
Z axis travel 90mm- (110mm if u need Rotary device)
Speed of working 0-4000mm/min
Spindle power 1500W (Water-Cooling Motor)
Taper sleeve 3.175mm(1/8"), 4mm (1/6") and 6mm (1/4")
Operating system Mach3 / DSP Controller / NCSTUDIO
File form It supports G-code, which is compatible with so many CAD/CAM software,
such as Artcam / Cascate / Proe / Artgrave / Type3/Artcut, etc.
Repeat accuracy 0.02mm
Voltage 220V-50HZ, 110V-60HZ